Tag Archives: business case

Got Sustainable Procurement? Yes! No! Maybe. Supply Chain Surveys Read the Tea Leaves (Part1)

21 Jul

Courtesy LeoReynolds via Flickr CC

To paraphrase  a timeless Bob Dylan song, “The Times They Are A’ Changin’” is no understatement.  You can read the details from across the globe in the news every day and are rapidly happening simultaneously on political, economic and social levels. And business is also making radical changes in the sustainability and corporate social responsibility (CSR)  frontier.

“Then you better start swimmin’
Or you’ll sink like a stone
For the times they are a-changin’.”- Dylan

One area that appears to be in movement is Procurement. You know, those folks on the third floor in the back that order stuff?  Well, wrong! I’ve maintained that the heart of a sustainable supply chain runs through its procurement function.  That’s because every product- every single purchase- has a hidden human health, environmental and social impact along the entire supply chain.  My previous posts have discussed how the procurement function is a vital cog in product value chain.  Purchasing staff are the “gatekeepers” that can access powerful tools and serve as a bridge between supplier and customer to assure that sustainability and CSR issues are taken into account during purchasing decisions.  2010 was a watershed year for sustainability initiatives and supply chain management and I predicted that 2011 would see greater progress.

So I was incredibly excited when I recently got my hands on a relatively new white paper from Ariba, entitled “VISION 2020 -Ideas for Procurement in 2020 by Industry-Leading Procurement Executives”.  According to the conveners of the document, the “objective [of the effort initiated in 2010] is to initiate a dialogue on the future of procurement and to create a roadmap for how to get there.”  For that, they connected with leading practitioners and executives from around the world and across a variety of sectors to share their ideas, best practices and to read the tea leaves as to where procurement might be in 10 years.

And while the initial report laid out some pretty intriguing and widely varying trends and predictions about the state of procurement in the corporate function, I was unfulfilled.  I was all ready to read about how the emergence of sustainability in the marketplace was going to drive procurement decisions.  I expected to hear how top flight companies around the world were collaborating with their supply chain, implementing staff training on ‘green purchasing’ practices, and implementing sustainability driven supplier audits and ratings scorecards.

Boy, was I wrong!  Only ONE  mention of the word “sustainability” (thank you Dr. Heinz Schaeffer, Chief Procurement Officer, Northern and Central Eastern Europe for AXA), and no mentions of “responsible sourcing”, “green supply chain” or “sustainable sourcing”.  I would have expected more from chief procurement representatives from the likes of KeyBank, Maersk, Sodexho, and former execs from Hewlett- Packard, General Motors, and DuPont.  Most of these companies are generally considered leaders in the sustainability space.  So why would there be a disconnect between what companies are doing in design, manufacturing and product life cycle management and the procurement function?

Before we go too far, its helpful to define what “sustainable procurement” is.  While there is no singular definition for it, I like the definition offered up by the  UK-based Chartered Institute of Purchasing & Supply (CIPS).  CIPS definition is  “a process whereby organisations meet their needs for goods, services, works and utilities in a way that achieves value for money on a whole life basis in terms of generating benefits not only to the organisation, but also to society and the economy, whilst minimising damage to the environment.”.  And what CIPS defines as  ‘whole life basis’ is that “sustainable procurement should consider the environmental, social and economic consequences of design; non-renewable material use; manufacture and production methods; logistics; service delivery; use; operation; maintenance; reuse; recycling options; disposal; and suppliers capabilities to address these consequences throughout the supply chain” [emphasis added].

It’s a good thing that the authors from Ariba stated that “The [2020 Vision]report is intended not as an end, but rather as a point of departure for much discussion and debate around where procurement can and should be setting its sights for the year 2020 and beyond.  In fact, Ariba invites readers to “join the debate and to extend the discussion with new ideas by joining the conversation.  I have and I hope you will too.  But I think I’ll start right here first.

Key Findings of Interest:

The report identified six key trending areas and take-aways among the participants who have weighed in so far, namely:

  1. Procurement devolves- with spend management requirements shrinking, companies are being forced to optimize what resources they have and make better informed decisions.  More work at the business line level will occur, possible eliminating the central procurement function entirely.  Money and metrics will drive most decisions as companies face leaner profit margins.  There will be a need to engage end customers more and more and leverage relationships.
  2. The new supply management emerges– some traditional sourcing functions may become outsourced.  Strategy “will tie directly to an enterprise’s end customers and it will be more cognizant of the diversity of desires and requirements within the customer base”.
  3. Skill sets change.  The Chief Procurement Officer and staff must have broader skills that allow them to not only create opportunities for revenue enhancement internally and optimized “spend”, but also be more in touch with end customer values-driven needs. Procurement staff need to be tuned into multiple tiers of the supply chain, dive deep “inside the supply chain and bring [issues] forward to the designers within [individual] companies”.
  4. Instantaneous intelligence arrives.    Market pricing will become more transparent [the Cloud forces transparency to some degree].  Companies will have to rapidly extract innovation and other value from supplier bases, and build exclusive commercial relationships with leading suppliers that share both risks and rewards.
  5. Collaboration reigns- There will be as the report notes a “big emphasis on driving and taking innovation from the supply base… the supply role will be less ‘person-who-brings-innovation-in’ and more ‘person-who-assembles-innovation-communities-and-gets-out-of-the-way’.  Suppliers are being asked more often to participate in early design and product development as a way to leverage risk and control overall product life cycle management risks.
  6. Risk management capacity and demands soar– as companies are already realizing, effective procurement relies on response to risk management variables (financial, ethical, and operational performance).  Companies must create “360-degree performance ratings and provide greater transparency into market dynamics, potential supply disruptions, and supplier capabilities”.  A few participants noted that  there will be a “big expansion in the kinds of risks companies address in their supply chains, considering, for example, such things as suppliers’ sustainability, social responsibility…”.

Now if I read in between the lines, I can easily pluck out a number of key procurement trends from the 2020 report that transfer well to sustainability and responsible sourcing.  Risk Management.  Collaboration.  Design phase (life cycle) engagement of multi-tiered suppliers.  Key performance metrics. Responding to consumer demands. Supplier performance ratings. 

Courtesy babycreative via Flickr CC

One takeaway for me appears that there may be a disconnect still between the procurement function and other functions within organizations. So is the procurement function still operating in obscurity in most organizations?  It all depends who you talk to but also on your skill at reading the tea leaves.

Rest assured that compared to only a few years ago, more companies that are seeking to manage the life cycle environmental impact of their productsfrom design and acquisition of materials through the entire production, distribution and end of life management.  They’re finding sustainable procurement to be a valuable tool to quantify and compare a product or component’s lifetime environmental and social impact early on in a products value chain while positioning the company for smart growth in a rebounding economy.  We may be at a sustainable procurement “tipping point” and Part 2 will present the results of a very promising benchmark report recently released by HEC-Paris and Ecovadis, which tells a much different story.

The times they are [indeed] a’changin’.

Advertisements

Greenpeace Takes Global Clothing Brands and Chinese Textile Supply Chain to the Cleaners. Who’s Responsible?

15 Jul

“I make my living off the evening news

Just give me somethin’, somethin’ I can use

People love it when you lose

they love dirty laundry”(Don Henley)

(from Greenpeace Report, "Dirty Laundry")

I was reminded of that Don Henley (The Eagles) solo hit from back in the 1980’s when I read about Greenpeaces latest initiative and report…aptly titled…you guessed it, “Dirty Laundry”.  The report focuses on the high levels of industrial pollutants being released into China’s major rivers like the Yangtze and the Pearl and commercial ties between a number of international brands such as Adidas, Nike and Li-Ning with two Chinese manufacturers responsible for releases of those hazardous chemicals.  Greenpeace has also launched the challenge ‘Detox’ Campaign, calling “brands, especially Adidas and Nike, to take the initiative and use their influence on its supply chain.”  The organization unfurled its characteristic banners at Adidas’s main retail store in Beijing this week.

There are several nuances to this story that are important to pass on and collaborative opportunities (rather than the finger-pointing that has plastered Twitter and other media the past 24 hours) to explore.

Supply Chain Challenges …Again!

This latest supply chain environmental wrinkle underscores the challenges multi-national organizations (MNC) are facing daily in oversight and enforcement of first tier, second tier or lower contract manufacturers.  If it’s not Apple under the radar, its Nike, or Adidas, or GE…who’s next?  Recent events concerning Apple Computers alleged lax supplier oversight and reported supplier human rights and environmental violations only shows a microcosm of the depth of the challenges that suppliers face in managing or influencing these issues on the ground.

To be fair, although the pollution is real and the threat of toxics contamination very real, it’s possible that Greenpeace may be sensationalizing Nikes and Adidas’s culpability.  In fact, neither company directly is involved with the key manufacturers labeled in the Greenpeace report.  The two manufacturers are the Youngor Textile Complex in Ningbo, an area near Shanghai along the Yangtze River Delta, and Well Dyeing Factory Ltd. in Zhongshan, China, along the Pearl River.  The Younger Group is China’s biggest integrated textile firm.

“Game on, Nike and Adidas.  Greenpeace is calling you out to see which one of you is stronger on the flats, quicker on the breaks, turns faster and plays harder at a game we’re calling ‘Detox’,” “Whether you’re ‘All in’ with Adidas or believe in the Nike motto to ‘Just do it,’ you can challenge the brand you wear to win the race to a clean finish.” -Greenpeace DeTox campaign’s website.

(from Greenpeace Report, "Dirty Laundry")

Both Nike and Adidas admitted jointly that said their work at Youngor is limited to cut-and-sew production — not “wet processing” such as dyeing and fabric finishing that Greenpeace says is the cause of the chemical discharge.  Greenpeace did not hide behind that fact but made the point (perhaps rightly so) that “As brand owners, they are in the best position to influence the environmental impacts of production and to work together with their suppliers to eliminate the releases of all hazardous chemicals from the production process and their products”.  I agree on the grounds that effective supply chain sustainability practices and corporate governance must be driven by the originating manufacturers that rely on deep tiers of suppliers and vendors for their products.

That being said, I think that to call out Nike and Adidas specifically (along with other companies like Puma) is to suggest that they are not doing the right thing as regards sustainability in the apparel industry.  For instance, Nike has learned from its mistakes if the past (especially on the labor/human rights side of social responsibility) and implemented aggressive governance frameworks and on the ground oversight programs.  Also, the  Nike Considered Index evaluates solvents, waste, materials, garment treatments and innovation, and the company has an internal working group constantly evaluating Restricted Materials lists.

Kick ’em when they’re up

Kick ’em when they’re down

Kick ’em when they’re up

Kick ’em all around- (Don Henley)

Chinese Laws and Regulatory Oversight- Not in Sync

As I noted recently, China is still in the “ramp-up” phases of economic development.  Plus it’s been evident for some years that enforcement of environmental laws and regulations by government agencies has not been on par with the intent of the laws.  According to the report, samples taken from the facilities contained heavy metals and alkylphenols and perfluorinated chemicals, which are restricted in the United States and across the European Union.  These chemicals have reproductive and hormone disruptive effects Therein lies another institutional problem…the laws in the home countries of the MNC’s are not in sync with those in the host manufacturing country- in this case, China.

Writing yesterday in China Hearsay, Beijing based lawyer Stan Abrams offered this up.  “This is a classic law versus CSR problem. The law here in China allows for this activity, yet the allegation is that this is a harmful activity. Should the companies in question merely follow the law or “do the right thing” and either sever ties with the polluter or pressure it to change its behavior?”

It’s likely that (for the foreseeable future) Chinese political and economic systems will remain focused on rapid development at all costs. So it’s critical that local/in-country government policies be aligned as well to support capacity-building for companies to self-evaluate, learn effective auditing and root- cause evaluation, institute effective corrective and preventive action programs and proactively implement systems based environmental management systems.

Multi-Sector Collaboration is the Answer

The apparel industry as a whole has taken a very proactive stance in looking at ways to redesign sustainably, produce its goods taking a cradle-to cradle perspective, and manage toxic chemical use and waste streams so that human and environmental exposures are minimized.  The multi-stakeholder Sustainable Apparel Coalition ironically includes Nike, the Gap Inc, H&M, Levi Strauss, Marks & Spencer, and Patagonia (some of whom are also being targeted by Greenpeace).  Over 30 companies have committed to collaborating in an open source way to drive the apparel industry in developing improved sustainability strategies and tools to measure and evaluate sustainability performance.  In addition over 200 outdoor products companies from around the world have been working together on sustainability best practices and standards, called the Eco-Index, led by the Outdoor Industry Association and European Outdoor Group.

The most successful greening efforts in supply chains in “tiger economies” are based on value creation, sharing of intelligence and technological know-how, and support in developing environmental regulatory frameworks that have the force of law. MNC’s and contract manufacturers can collaboratively strengthen each other’s performance, share cost of ownership and social license to operate and create “reciprocal value”.  Greenpeace wants MNC’s to establish “  clear company and supplier policies that commit their entire supply chain to the shift from hazardous to safer chemicals, accompanied by a plan of action that is matched with clear and realistic timelimes”.  Agreed with that sentiment, but many hurdles remain to cross.

Youngor Textiles, Adidas and others cited in the report have not hidden from the findings, and Youngor has committed to working jointly with Greenpeace to find a workable solution to remove potentially harmful toxics from the apparel manufacturing supply chain.  Solving this problem on the ground will take a multi-stakeholder effort to 1) balance contractual arrangements among many parties, 2) craft good law and enforceable regulations, 3) drive clean chemistry, 4) redesign production processes and use advanced manufacturing technology, and, 5) develop, implement and maintain robust contactor monitoring.

I will be watching carefully to see how this collaborative effort with an NGO giant and big business unfolds…er, should I say “unfurls”.

Nothing Says “Green Supply Chain’ Like Innovative, Sustainable Packaging

8 Jul

Courtesy Tiny Banquet Committee under CC License

The pea pod is possibly the greatest sustainable packaging design nature can provide.  It packs a lot in a small space, efficiently uses the minimum amount of resources…and best of all its compostable…well sort of unless I eat it!

And like the simple pea pod, few sustainability attributes in a supply chain come together across the value chain than packaging.  Packaging and repackaging is ubiquitous along every step of the chain, from product design, prototyping, procurement production, distribution, consumer end use and post consumer end-of-life management.  And the more parts that are in use in making of a product, and steps along the way to deliver the parts, the greater the packaging (and hence environmental footprint) involved along that chain.  And for every packaged part that comes from someplace else to make a product, a similar carbon, energy and resource use can be measured.

That’s why sustainable practices in packaging are so important in driving supply chain efficiency…and why innovation in the ‘green’ packaging sector has been “white hot” the past several years. A study by Accenture found that retailers can realize a 3 percent to 5 percent supply chain cost savings via green packaging initiatives. So if you extrapolate that type of savings out across multiple tiers of supply chain activity, where packaging is the common denominator, the efficiencies and savings can rack up quickly.

A new report from research organization Visiongain finds that because of a variety of drivers such as carbon emissions, extended producer responsibility and waste reduction targets plus advanced packaging technologies, the sustainable and green packaging market’s worth is expected to reach $107.7 billion in 2011. Their report shows varying degrees of growth from developed to developing nations; however what’s striking is that the growth trend is weathering the slumping global economy and higher production costs.

Sustainable Packaging 101

Sustainable packaging solutions deliver around two colors according to the Accenture report: black (deliver reduced costs) and green (reduce environmental impacts). Sustainable packaging relies on best engineering, energy management, materials science and life cycle thinking to minimize the environmental impact of a product through its lifecycle.  Given the past decade or so of science and engineering work around sustainable packaging, there are some discovered and tested attributes, such as:

  1. Reducing packaging and maximizing the use of renewable or reusable materials
  2. Using lighter weight, less toxic or other materials which reduce negative end-of-life impacts
  3. Demonstrating compliance with regulations regarding hazardous chemicals and packaging and waste legislation ( such as the European Directive 94/62/EC  on Packaging and Packaging Waste)
  4. Optimizing material usage including product-to-package ratios
  5. Using materials which are from certified, responsibly managed forests
  6. Meeting criteria for performance and cost (e.g., minimize product damage during transit)
  7. Reducing the flow of solid waste to landfill
  8. Reducing the costs associated with packaging (i.e., logistics, storage, disposal, etc.)
  9. Reducing CO2 emissions through reduced shipping loads

Best in Class Examples

I have seen companies stress the importance of the 6 R’s of sustainable packaging (refill, reduce, recycle, repurpose, renew, reuse;  Walmarts 7 R’s of Sustainable Packaging (Remove Packaging, Reduce Packaging, Reuse Packaging , Renew(able), Recycle(able), Revenue (economic benefits), and  Read (education);  and even the 10 R’s eco-strategy (Replenish, Reduce, Re-explore, Replace, Reconsider, Review, Recall, Redeem, Register and Reinforce).

Associations are stepping up to the plate as well as manufacturers in a variety of consumer product markets.  In March of this year, the Grocery Manufacturers Association (GMA) announced the results of survey research by McKinsey that indicated elimination of more than 1.5 billion pounds (800 million pounds of plastic and more than 500 million pounds of paper) since 2005, and another 2.5 billion pounds are expected to be avoided by 2020.  Over 180 packaging initiatives were identified and evaluated.  The GMA estimated that the reduction would be equal to a 19 percent reduction of reporting companies’ total average U.S. packaging weight.

In the fast moving consumer goods category Coca Cola’s packaging efficiency efforts just in 2009 avoided the use of approximately 85,000 metric tons of primary packaging, resulting in an estimated cost savings of more than $100 million.  The company rolled out of short-height bottle closures, reducing material use, implemented traditional packaging material light weighting; and used more recycled materials in packaging production.  At the end consumer point, the company has also supported the direct recovery of 36% of the bottles and cans placed into the market by the Coca-Cola system and continues to work with distributors on increasing recovery efforts.

In the electronics space, Dell Computer committed in 2008 to reduce cost by $8 million and quantity by 20 million pounds of packaging by 2012 centered around three themes (cube, content, curb):

  • Shrinking packaging volume by 10 percent (cube)
  • Increasing to 40 percent, the amount of recycled content in packaging (content)
  • Increasing to 75 percent, the amount of material in packaging to be curbside recyclable (curb).

As an example, Dell wanted to find a greener, more cost efficient way to package its computers by eliminating foams, corrugated and molded paper pulp.  The solution was sustainably sourced bamboo packaging certified by the Forest Stewardship Council.  So far, Dells efforts have resulted in eliminating over 8.7 million pounds of packaging, and they have nearly met their recycled content goal.

Perhaps most significantly, WalMart took a huge step in 2007 to seek supplier conformance around packaging.  Since then, despite the initial uproar, there has been an uptick in design and innovative product activity by thousands of key suppliers in response to the mega-retailers challenge.  By reducing packaging in the Wal-Mart supply chain by just five (5) percent by 2013, that would 1) prevent 660,000 tons of carbon dioxide from entering the atmosphere, keeping 200,000 trucks off the road every year (that’s a green attribute) and save the company more than $3.4 billion (a black attribute).  Walmarts bottom line was to put more products on its shelves in the same space, and also recognized the sustainability attributes that change would make.  They also knew that most consumers (me included) just despise excess packaging.  Here are two examples of Walmart supplier efforts from a small and large supplier:

Alpha Packaging: the company has a new bottle design for Gumout Fuel Injection Cleaner.  The company concentrated the product and switched from PVC bottles (which are not recyclable) to much smaller bottles made from PET (which is recyclable and has 30% post-consumer recycled content).  This led to 1) reduced product weight by up to 51% and 2) capability to transport a truck filled with new 6 oz products (formerly 12 oz) equating to 153,600 bottles as opposed to 61,000 originally.

General Mills: the company took a novel approach and they looked at the product first.  They straightened its Hamburger Helper noodles, meaning the product could lie flatter in the box. This, in turn, allowed General Mills to reduce the size of those boxes.   According to the company, that effort saved nearly 900,000 pounds of paper fiber annually.  The company effort also managed to reduce greenhouse gas emissions by 11 percent, took 500 trucks off the road and increased the amount of product Wal-Mart shelves by 20 percent.

Win-Win-Win.  For the environment, for manufacturers and suppliers, and for consumers.

Full Circle Collaboration is Vital to Drive Sustainable Packaging

What makes sustainable packaging compelling is that it’s one of the key elements of a product that consumers can see, touch and feel.  Over packaging or improper packaging can produce high reaction levels, right? (remember last year’s noisy Sun Chips compostable bag dust up?)  But in an interesting post last year in Packaging Digest by Katherine O’Dea of the Sustainable Packaging Coalition, she mentioned the critical importance of collaboration between brand owners and retailers. What was a scary statistic is that “brand owners and retailers may have direct control over as little as 5 percent of the environmental impacts of packaging and only indirect control over the other 95 percent.”  On the other hand another study conducted by the market research firm Datamonitor showed of U.S. consumers surveyed, 49% felt that packaging design has a medium or high level of influence over their choice of food and drink products.

Just as there are challenges to drive consumer acceptance of more sustainable types of package designs (especially aesthetics), there are equally challenging design factors (such as package strength, permeability, and other physical factors that may compromise product integrity during shipment.

Opportunities to Leverage the Supply Chain from Design to Post Consumer Package management

High performing manufacturing companies are clearly using sustainable packaging design and manufacturing as a way to lever efficiencies through the product value chain.  Companies are finding that using less complex packaging helps cut sourcing, energy production and distribution and fuel costs across the supply chain.  The glory days of corrugated packaging as the one stop solution are being replaced with reusable packaging options.  Also, reducing the consumption of raw materials, carbon emissions and waste generation reduces manufacturing costs.

Since disposal by consumers is one of the largest waste streams in the supply chain, using less packaging of direct-to-consumer shipments also offers great opportunities for supply chain optimization.  The previously mentioned Accenture report recommends that through route planning and sourcing software, “collaboration across the companies in the supply chain is necessary to maximize freight utilization. In particular, retailers need to proactively encourage vendors to provide pallet or “trailer feet” specifications for collecting shipments… retailer’s planners can determine the optimum transportation mode and look for multi-stop opportunities.”

Optimized Supply Chain (Accenture)

As shown in the accompanying diagram, Accenture suggests there are opportunities to reduce the packaging/un-packaging cycle by addressing the product life-cycle and optimized material use.   Through ongoing recycling and the use of alternative materials throughout the product value chain, opportunities are created to reduce the volume of packaging waste. Also, take back programs create a two-way transportation flow, with reusable packaging materials being sent back up the supply chain rather than to a landfill.

Remember too that there are several key association and initiatives that can be tapped into, including:

  1. Sustainable Packaging Coalition: http://www.sustainablepackaging.org/default.aspx
  2. Greener Package: http://www.greenerpackage.com/
  3. Sustainable Packaging Alliance: http://www.sustainablepack.org/default.aspx
  4. Sustainable Biomaterials Collaborative http://www.sustainablebiomaterials.org
  5. Reusable Packaging Association: http://reusables.org/

Some final pointers to consider when designing packaging and using the supply chain to drive sustainability:

  • Source alternative sustainable packaging materials- the innovative options are plentiful.
  • Evaluate product life-cycle impacts as a way to discover design options that could lead to less packaging.
  • Anticipate the total energy and resource use over an entire products package life
  • Evaluate materials disposal and post consumer end-of-product life opportunities
  • Design products for efficient transport
  • Schedule and optimize transportation networks
  • Collaborate, Collaborate, Collaborate!

Keeping it Simple: Seven Action Steps for Manufacturers and Suppliers to Climb Up the Sustainability Ladder

29 Jun

The authors new three-string Cigar Box Guitar (made with mostly recycled parts)

This past weekend I went and finally did it.  I closed the loop on my dream to play gritty, stripped down delta blues on a cigar box guitar (CBG) in tandem with my harmonica.  At first I went to the local Recycled Arts Fair thinking I’d buy a four string CBG.  But within a few minutes of speaking with local Vancouver, WA luthier Alan Matta  at Hammered Frets (www.hammeredfrets.com), he’d convinced me to start with a 3 string and then think about a 4 (or more) string later.  Why?  Well, it’s simple.  I don’t know how to play the darn thing!  Fewer strings also means easier chords (with many requiring just one or two fingers), and more harmonic simplicity to help a newer player (like me) keep from getting overwhelmed. Plus, fewer strings means less tension on the neck and risk of bowing.   (Sidebar: I do have a musical pedigree, having played brass instruments and harmonica since I was 12), and I get music theory, but playing stringed instruments…can an old dog learn a new trick?)

If you are a small to mid-sized manufacturer for instance, getting started with a company sustainability initiative, or in greening a supply chain is a lot like learning a musical instrument.  Quite often if companies try to bite off more than they can chew (three vs. four string chords), there’s too much stress (like a guitar neck) and greater risk of failure (bowing of the neck).  Simplicity often trumps complexity when getting started down the sustainability path.  This is particularly true if companies are starting from scratch, or lack deep financial or personnel resources.  So before companies start to feel overwhelmed, there are ways to “ease” into sustainability, without the stress.

Last year I wrote about how the “look” and “feel” of sustainability depends on the level of enlightenment that a company has, the desired “end state” and on the depth of its resources to execute the change.  Also, I spoke about the importance of adequate resources to make the leap and a systematic process to keep on track.  I advocated systematic planning before moving  ahead.  This involved:

  • Building a system to plan, implement, measure and check progress of the initiative.
  • Looking for the quick wins.
  • Building an innovation-based culture and reward positive outcomes.
  • Measuring, managing, reporting and building on the early wins.
  • Building the initiative in manageable chunks.

A Systems Framework to Get the Ball Rolling

Let’s accept for a moment that if you are reading this, you already understand that sustainability as a term means many things to many organizations.  An effective sustainability roadmap and the systematic framework to manage sustainability must consider four key focal areas: compliance, operations, product sustainability and supply chain sustainability.  Bearing in mind that “one size doesn’t fit all”  there still needs to be a systematic way to get to the “desired goal”.  A systematic framework like an ISO 14001-based Environmental Management System (EMS), offers a set of processes and tools for effective accomplishment of sustainability objectives.  But in the event that a company isn’t quite ready to make the leap into the ISO world, there are alternatives.

A Cycle of Continual Improvement

“Plan- Do-Check-Act” Creates Shared, Sustainable Value

One such alternative comes from Organisation for Economic Co-operation and Development (OECD).  The OECD has produced a “ Sustainable Manufacturing Toolkit”, that as they say “provides a practical starting point for businesses around the world to improve the efficiency of their production processes and products in a way to contribute to sustainable development and green growth.” The OECD addresses the four key sustainability focal points that I mentioned previously.  As an aside, a collaborator with SEEDS Global Alliance (Sustainable Manufacturing Consulting) had a hand in contributing to this valuable project by providing detailed feedback on the toolkit.

According to the newly launched site, it offers two parts: a step-by-step Start-up Guide and a Web Portal where technical guidance on measurement and relevant links are provided.  I tested out the site, and while parts appear to still be under construction, the information there is pretty intuitive and gives the novice some basic information that they can use to get started.  For manufacturers in particular, the guidance offers 7 action steps to sustainable manufacturing:

Prepare [Plan]

1. Map your impact and set priorities: Bring together an internal “sustainability team” to set objectives, review your environmental impact and decide on priorities.

2. Select useful performance indicators: Identify indicators that are important for your business and what data should be collected to help drive continuous improvement.

Measure [Do]

3. Measure the inputs used in production: Identify how materials and components used into your production processes influence environmental performance.

4. Assess operations of your facility: Consider the impact and efficiency of the operations in your facility (e.g. energy intensity, greenhouse gas generation, emissions/discharges to air and water [ and land]).

5. Evaluate your products: Identify factors such as energy consumption in use, recyclability and use of hazardous substances that help determine how sustainable your end product is. (I’d also add water consumption and wastewater outputs).  It’s here that the upstream supply chain becomes a very important consideration.

Improve [Check/Act]

6.Understand measured results: Read and interpret your indicators and understand trends in your performance.

7. Take action to improve performance: Choose opportunities to improve your performance and create action plans to implement them.

What more can a small to mid-sized manufacturing company ask for if they are seeking basic actionable steps for starting up the sustainability ladder.  Remember folks, it’s better to start in small, incremental steps, with a scalable internal (risk and process driven) and external (supply network enabling) plan that provides “sustainable value”.

Implementing a sustainability program is best done in stages, like learning that cigar box guitar.  No organization has the resources (or appetite) to tackle the “whole enchilada” at once.  That’s why I’m keeping it simple and sticking with the three-string…for now.

“Continual Improvement” Using Sustainability Metrics Takes Planning, Accountability & Resources

23 Jun

"Jump Start" by Jenny P (CC License)

Note:  This post marks the 75th since I started writing in early 2009.  When I launched ValueStreaming, I did so with the intent of providing timely, relevant, quality content over quantity.  The feedback that I’ve consistently received  is that this blog gives readers detailed, value-added content and thought leadership in the sustainability, supply chain and environmental policy space.   I humbly thank you all for your readership and support…you are the sustaining “wind in my sails”.  Paz, Dave

“On your mark, get set”…BANG.  As a competitive swimmer in my youth, I learned the rhythm of a good start off the blocks, kept my head down and paced myself through to the finish line.  I never won the “big” race, but always went for my personal best.  It’s that way with sustainability initiatives. Having a good baseline and pushing the limits to improve to the next level

Back in the late 1990’s I was working with one of my many semi-conductor clients on their ISO 14001 Environmental Management System.  A hallmark of ISO 14001 is “continual improvement”, focused primarily on going beyond compliance to reducing the overall environmental impacts and footprints of operations.  This particular company had identified hazardous waste generation as a “significant aspect” of its operations and developed some programs and targets intended to reduce generation.

One of the facility engineers was very excited one day when I showed up at the facility, proudly telling me that the company had managed to reduce waste generation by 25% over the past several months since he’d started tracking metrics.  “That’s great!” I said. “How’d you do it?”  He responded, “Well I ‘m not sure exactly”.  So I prodded.  “How has production at the plant been the last quarter?” “Well, it’s down…um, about 25%”, he answered in a muted tone.  See a problem here?  The company didn’t “normalize” the data (pounds of waste generated per number of units produced, for instance).  So in effect, there was no “continual improvement.  Oh well, back to the drawing boards!

Setting the Sustainability Mark…and Missing It

So it was interesting to read a summary of Green Research’s latest report, “Setting and Managing Sustainability Goals: Trends and Best Practices for Sustainability Executives.  I had the pleasure of meeting Green Research’s founder, David Schatsky, at the recent Sustainable Brands ’11 Conference in Monterey,  California.  In this latest report, David seems to have touched on some issues which get to the core of a value-added sustainability initiative…that being, demonstrating “continual improvement”.

As  this week’s by Mr. Schatsky article in Environmental Leader notes, while a flood of public and private companies (across many sectors) are “increasingly using public goals to signal their commitment to sustainability and their superiority to rivals…many are unprepared to meet those targets”.  The report suggests that sustainability planning, implementation, and performance measurement are still in an early maturation phase compared to financial and other operational goals.  Some of the key findings were:

  • A quarter of the 32 sustainability executives surveyed in Europe and North America for the study say their companies have set “aspirational” sustainability goals and lack a clear plan to achieve them.
  • Over 40 percent said progress on sustainability goals is reported to senior management only semi-annually or annually.
  • 57 percent of respondents characterized at least some of their sustainability goals as “stretch goals” – that is, challenging but probably achievable – and 54 percent said at least some of their goals are “realistic”.

 “Despite the best of intentions, even some excellent companies are challenged to execute on the sustainability goals they announce,” said David Schatsky, principal at Green Research

As I noted back in August 2010 in a post on Environmental Leader, there are two old axioms:

1)      “You are what you measure”, and

2)      “What gets measured gets managed.”

As Green Research’s study revealed, without an effective strategy to establish an internal benchmark for continual improvement, it becomes harder to innovate, advance and proactively respond to stakeholder expectations. Finally, good metrics if applied properly will foster innovation and growth.  Therefore, it’s vital that there be a systematic process in place that maintains focus on continual improvement.  Continual improvement is the primary driver for monitoring and measuring performance. If metrics don’t add value, they will not support continual improvement and eventually will not be used.  It’s a vicious cycle that can be avoided if the proper system is firmly implanted in organizational strategy and operations.

Setting Goals That Matter

Many times over the past several months, I’ve been asked by colleagues and clients”what can I measure that means something”.  And I answer them usually by asking “what matters to your organization and its stakeholders”?  “I see what your saying”, they say “but I can’t always see the payback”.  Well, sometimes the “payback” is hidden and can’t always be realized in tangible, hard dollar terms. Sometimes, especially if companies are not water, energy or resource intensive, or don’t produce a lot of waste byproducts, you need to peel off some layers.  What this often means is looking at other production, operational or worker activities that can’t be measured in hard dollars but in terms of “efficiency”.  Sometimes metrics can be measured in terms of avoided costs rather than actual expenditures.  As an example,  a client of mine “avoided” $2.4 million in accrued fines and violations (over a three year period) due to enhanced sewer infrastructure maintenance and reduced response times to effluent spills when they occurred.

"Bullseye" by TimSnell (CC License)

As the Green Research found, many companies initially establish said that “targets for realistic or stretch goals…through a bottom-up process, beginning with a baseline of current performance.”  I view this finding as similar to what I coach my clients to do in environmental management system or sustainability engagements- perform a risk-based evaluation of what poses the greatest environmental, social or governance risk and establish measurable (and achievable) objectives and targets.   Some of my clients like the Natural Step “back casting” process too , which attempts to envision a company’s “desired state”, measure a baseline “current state”, and fills in the gaps with programs and activities intended to reach the desired state.

Remember, when companies establish sustainability objectives (whether they are social, environmental, operational or financial) and define their targets, here are a few simple things to remember about metrics.  They must be:

  • Representative
  • Understandable
  • Relevant
  • Comparative
  • Quantifiable
  • Time-based and Normalized
  • Unbiased and Validated
  • Transferable

Staying on Track Within the Four Walls and in the Supply Chain

As I mentioned in last year’s post, once organizations decide what’s important to measure to meet sustainability related objectives, they needed to assure that they actually track metrics, report, calibrate and keep on measuring.  It’s called keeping your eye on the ball.  And this applies to supply chain management as well.  As I have reported in this space many times before, supply chain sustainability and responsible sourcing are two key ingredients for an organization to consider itself to be “truly” sustainable.  Many of an organizations greatest product and operations related impacts (like carbon emissions, resource or toxic chemical inputs, etc.) actually come from within its upstream supply chain.

Photo by HeraldMM (CCLicense)

A few tips to get your continual improvement process started:

  1. Measure things that add value to organizational decisions. Measuring for the sake of measuring is a waste of time.
  2. Make goal-setting a 360-degree exercise- Look inward through the organization rank and file for innovative ideas.  Seek advice and input from external stakeholders too (your suppliers and customers matter too!).
  3. Commit to what you can control or influence.  Don’t make broad declarations that you cannot achieve because you’ve no influence. Don’t over commit ( although a few heretically goals here and there aren’t too dangerous)
  4. Get some quick wins under your belt.  This will enhance the momentum behind the effort.  Remember to scale performance incrementally in line with the financial and labor resources that you’ve budgeted
  5. Own the goal and be accountable.  It’s not likely that organizations will succeed in meeting their goals without someone keeping track.  Make sustainability performance part of personal or group performance evaluations.
  6. Measure, Report, Repeat.  Don’t stop at the first sign of success or trouble.  Look for ways to press on, raise the bar and continually improve.  Report progress regularly (sometimes monthly, sometimes quarterly.  It all depends on what is being measured. 
  7. Go Short, Go Long.  Set some targets as short term goals, but think long term too (three to five years out), and in alignment with corporate strategies.  Most large companies like my client (Johnson & Johnson), Unilever, Sony and many others usually set five to eight year planning horizons.
  8. Measure things that compare well but slightly differentiate yourselves from your competitors. Novel and unique metrics are just as important to differentiating you as your products.
  9. Seek out globally-recognized metrics (like the Global Reporting Initiative) to assure that multi-national companies who also measure sustainability metrics can apply the data to their own goals.
  10. If you are a large company with multiple department, divisions or sites, the metrics of the subordinate organizations must be able to be “rolled up” in a way that addresses the entire organization but still meets site or department specific needs. 
  11. Report the Bad with the Good:  No one’s perfect and a little self deprecation, even in business can pay handsomely from a reputational point of view.  In this WikiLeaks era, information moves swiftly.  Stay ahead of “the story”, own up to the shortfalls, you’ll be forgiven and given more credit for your successes.
  12. Build off of prior continual improvement initiatives to track perform over longer periods of time.  It’s not like you flicked on a switch one day and became the sustainable organization that you aspire to be.  It takes time.

On second thought, I did win a “big” race.  My freshman year in high school I placed first in a 100 yard Individual Medley event against an arch rival high school in the Chicago suburbs.  That was my greatest moment in the pool…for a race many said I wouldn’t even finish.

Whether Baked or Embedded, Experts Agree: Sustainability is Part of Organizational & Supply Chain DNA

14 Jun

In a new report, sustainability in the supply chain is one of four key indicators covered.  The report is entitle The Chief Supply Chain Officer Report 2011 and is  co-authored by Dr. Hau Lee (from the Stanford Graduate School of Business), and Kevin O’Marah (group vice president, supply chain research for AMR Research).  Over 750 global executives completed the survey, including SCM World members and non-members, with over 50% of respondents at VP-level and above within their organizations.

The authors prioritized issues across four key areas:  value-driving supply chain management, globalization, sustainability and talent management.   One of the key findings (and it’s no surprise in my mind is that sustainability “ increasingly forms part of the DNA for high performing supply chains, with 65% of respondents characterizing pressure from senior management and the board as the source of sustainability efforts “.    The second source of sustainability efforts is pressure (interesting enough) comes from customers (46%), followed by pressure from government (35%).

The study also surveyed whether the use of the “carrot” or “stick” had greater effectiveness in encouraging supplier collaboration. The study found that companies appear to react to supplier breaches in sustainability standards by warning i.e. the “stick” and then taking punitive actions, while some act even more promptly without warning.  Most companies use reduced business as the “stick” (73% would reduce business after warning and 56% would reduce business without warning), while some act even more drastically, terminating the business relationship with suppliers (36% after warning and 42% without warning). On the “carrot” side of the study, enhancing  business relationships through “ preferred supplier status” or increased business engagements were found by most companies surveyed to be effective in supplier collaboration  (66% and 48% respectively).  The study compared well with some thoughts I shared in this space last year on the effectiveness of the carrot and stick approaches in changing supplier behavior (using examples such as Walmart, GE and Hewlett-Packard).

The authors concluded that “Ultimately, customer relationships and business opportunities with customers form the most important cornerstone of all sustainability activities” and that that the survey results positively indicate that “sustainability forms an integral part of a company’s supply chain improvement journey”.  So besides working within its own four walls, organizations continue to realize this year (like the previous few years) that sustainable supply chain management and responsible procurement has taken a solid place in business circles to enhance the corporate brand and deliver further value.

Embedded, Baked or Bolt-on?

The Chief Supply Chain Officer report  finding  on supply chain sustainability lends itself well with a key thought communicated at last week’s Sustainable Brands ’11 conference by Dr. Chris Laszlo (I was there and hopefully some of you found my Twitter stream).  Laszlo and Dr. Nadya Zhexembayeva have coauthored a new book, Embedded Sustainability: The Next Big Competitive Advantage, which explores the operational advantages, cost efficiencies and reputational gains that can be made from embedding sustainability, rather than taking a “bolt-on” approach.  Being a fan of baked goods, I have often referred to “baked in “sustainability practices, but it’s all semantics when you get down to it and the outcomes remain the same.

“Embedded Sustainability is the incorporation of environmental, health, and social value into the core business with no trade-off in price or quality – in other words, with no social or green premium.”- Laszlo and Zhexembayeva

Source: European Financial Review

As noted in the graphic, the goals, scope and outcomes associated with embedded sustainability (as compared to a “bolt-on” approach) drive  deeper and farther . In their research, the authors noted some interesting “lessons learned” from the many leading, innovative global companies that have embraced an embedded sustainability perspective.  One of those takeaways was that “the pursuit of sustainability involves hidden choices – whether to reduce negatives or provide positive solutions, and whether to pursue incremental change or heretical innovation – which are proving crucial to business strategy.”  In other words, it’s not easy to make the types of change needed without making some tradeoffs along the way.

In a crisp summary by Jen Boynton (@jenboynton) of Triple Pundit,   Dr. Laszlo deftly summarizes “three ways that sustainability initiatives build value for a firm:

  • Declining Resources-as energy and other inputs get more expensive, it makes financial sense to conserve them.
  • Increasing Expectations– customers, investors, regulators and employees expect more (as I mentioned above) and therefore a company has to deliver more in order to remain competitive.
  • Radical Transparency, often associated with CSR reporting, puts NGOs, unions, and government officials on the outside looking in with no secrets. A company has to do good things, otherwise their reputation and brand value will quickly suffer.”

As both authors noted in a European Financial Review article, “the linear throw-away economy, in which products and services follow a one-way trajectory from extraction to use and disposal, can no longer be supported, as we are simply running out of things to unearth and place to landfill. Consumers, employees, and investors are beginning to demand socially and environmentally-savvy products without compromise, while radical transparency is putting every company under a microscope.”  Just as I stated in last week’s blog, which addressed the threats and impacts of increased consumerism on sustainability itself, both businesses and consumers have an obligation to rethink the entire “make-consume” model, and explore design and end of life product management at both ends of the value chain.

The authors suggest that for companies to embrace the embedded approach to sustainability, “four interdependent and interconnected lines of action [can] help guide the journey:

  • Getting the Right Start: mobilizing, educating, and acting around specific low hanging fruits. Building momentum in the organization for sustainability projects that support existing business priorities and provide demonstrable pay-off.
  • Building the Buy-In: aligning company, value chain, and all other stakeholders around the vision of embedded sustainability.
  • Moving from Incremental to Breakthrough: developing clear but unorthodox goals, designing the strategy and capturing value through co-creation and innovation.
  • Staying with It: managing learning and energy while making sustainability ubiquitous but largely invisible in the business practice.”

So before you leap, plan ahead.  Build a system to plan, implement, measure and check progress of your sustainability initiative.  Look for the quick wins.  Build an innovation-based culture and reward positive outcomes.  Bake the initiative into the governance, operational, and communications of every corner of the four walls.  Expand your reach upstream to your key suppliers and spread the word to your customers.  Measure, manage, report and build on the early wins.  But more than anything, keep on baking…

Navigating Sustainable Supply Chain Management in China Takes a Keen Eye & Business Sense

7 Apr

2010 marked a watershed moment in supply chain sourcing among worldwide manufacturers and retailers. Sustainability observers and practitioners read nearly weekly announcements of yet another major manufacturer or retailer setting the bar for greener supply chain management.  With a much greater focus on monitoring, measurement and verification, retailers and manufacturers Wal-Mart, Marks and Spencer, IBM, Proctor and Gamble, Kaiser Permanente, Puma, Ford, Intel, Pepsi, Kimberly-Clark, Unilever, Johnson & Johnson, Herman Miller among many others made major announcements concerning efforts to engage, collaborate and track supplier/vendor sustainability efforts, especially those involving overseas operations.  Central to each of these organizations is how suppliers and vendors impact the large companies’ carbon footprint, in addition to other major value chain concerns such as material and water resource use, waste management and labor/human rights issues.Meanwhile, efforts from China’s manufacturing sector regarding sustainable sourcing and procurement, was at best, mixed with regard to proactive sustainability.  From my perspective as a U.S. based sustainability practitioner (with a passion in supply chain management), the challenges that foreign businesses with manufacturing relationships in China can be daunting.  Recent events concerning Apple Computers alleged lax supplier oversight and reported supplier human rights and environmental violations only shows a microcosm of the depth of the challenges that suppliers face in managing or influencing these issues on the ground.  Apple recently did the right thing by transparently releasing its Apple Supplier Responsibility 2011 Progress Report, which underscored just how challenging and difficult multi-tiered supply chain management can be.  But all is certainly not lost and many companies have in recent years begun to navigate the green supply chain waters in China. 

According to a World Resources Institute White Paper issued in the fall of 2010, China faces a number of supply chain challenges.  First, the recent spate of reports alleging employee labor and environmental violations can place manufacturing partnerships with global corporations at risk.  According to the report, Chinese suppliers that are unable to meet the environmental performance standards of green supply chain companies may not be able to continue to do business with such firms. Wal-Mart has already gone on record, announcing that it will no longer purchase from Chinese suppliers with poor environmental performance records. In order to be a supplier to Wal-Mart, Chinese companies must now provide certification of their compliance with China’s environmental laws and regulations.

Photo Courtesy of http://www.flickr.com/photos/scobleizer/ under Creative Commons license

Wal-Mart, like many other IT and apparel manufacturers also conducts audits on a factory’s performance against specific environmental and sustainability performance criteria, such as air emissions, water discharge, management of toxic substances and hazardous waste disposal. These actions are extremely significant as Wal-Mart procures from over 10,000 Chinese suppliers.  This increased scrutiny on environmental and corporate social responsibility through supplier scoring and sustainability indexing, says the WRI report may trump price, quality, and delivery time as a decisive factor in a supplier’s success in winning a purchasing contract.

Chinese Government Stepping Up Enforcement

Finally, what good news I hear about the depth of environmental regulations on the books in China is buffered by the apparent lax enforcement of the rules and regulations.  That is however appearing to change.  The WRI report indicated that the Chinese State Council is directing key government agencies, including the National Development and Reform Commission, the Ministry of Finance, and the Ministry of Environmental Protection to prohibit tax incentives, restrict exports and raise fees for energy intensive and polluting industries, such as steel, cement, and minerals extraction.   Also, it’s been reported in the past years that the People’s Bank of China and the Ministry of Environmental Protection are also working with local Chinese banks to implement the ‘Green Credit’ program, which prevents loans to Chinese firms with poor environmental performance records. In addition, the National Development and Reform Commission and the Ministry of Finance have issued a notice to all Chinese central and local governments to purchase goods from suppliers that are ‘energy efficient’. Finally, on a local level, governments have developed preferred supplier lists for companies producing environmental-friendly products for their purchasing needs.

Supplier Challenges Are Not Just Environmental

A China Supply Chain Council survey conducted in 2009 identified a huge gap in knowledge between (1) clear understanding of which environmental issues posed the greatest risk (2) what to do to manage significant environmental risks.  Also, nearly 40% of the company’s surveyed thought sustainability to be cost prohibitive, too complicated or where particular expertise was lacking don’t have the expertise (on the other hand 60% did!).  Two- thirds of respondents did consider sustainability to be a supply chain priority, although many were not confident of the return on investment.  However, more than half of the respondents reported that they had begun collaborating with their larger supply chain partners.    In fact, according to the World Resources Institute White Paper, despite increasing pressures to improve their environmental performance, Chinese suppliers face many financial challenges to operating in a more sustainable manner

World Resources Institute White paper notes increasing  non-environmental pressures, including:

  • “Extended green investment “payback”: While improving resource consumption, such as energy and water, provides long-term cost savings, the payback for making such environmental investments may be as long as three years, which is financially impossible  for many Chinese suppliers.

  • Lack of financial incentives from green supply chain buyers: Multinational buyers are often unwilling to change purchasing commitments and long-term     purchasing contracts to Chinese suppliers that make the investments to improve their environmental performance.

  • Rising operational costs: Chinese suppliers face  rising resource and labor costs. For example, factory wages have increased  at an average annual rate of 25 percent during 2007 to 2010. Rising costs dissuade suppliers from making environmental investments which may raise  operating costs.

  • Limited access to finance: The majority of Chinese suppliers are small and medium-scale enterprises (SMEs) with limited access to formal financing channels such as bank loans.  Chinese SMEs account for less than 10 percent of all bank lending in China,  and as a result, Chinese suppliers frequently do not have the capital to     make the necessary environmental investments.

  • Intense domestic and global competition: Chinese suppliers face intense competition from thousands of firms, both  domestic and international, within their industries. This intense competition puts constant pressure on suppliers to cut costs, which can  include environmental protections, in an effort to stay in business.

Leveraging the Supply Chain to Gain “Reciprocal Value”

Leading edge, sustainability –minded and innovative companies have found “reciprocal value” through enhanced product differentiation, reputation management and customer loyalty.  I recently highlighted the model efforts that GE has implemented with its China based suppliers to implant responsible and environmentally proactive manufacturing into their operations.  GE’s comprehensive supplier assessment program evaluates suppliers in China and other developing economies for environment, health and safety, labor, security and human rights issues. GE has leaned on its thousands of suppliers to obtain the appropriate environmental and labor permits, improve their environmental compliance and overall performance.   In addition, GE and other multi-national companies (including Wal-Mart, Honeywell, Citibank and SABIC Innovative Plastics) have partnered to create the EHS Academy in Guangdong province.  The objective of this no-profit venture is to create a more well-trained and capable workforce of environmental, health and safety professionals.

Summary

Many of my prior posts have highlighted the critical needs for increased supply chain collaboration among the world’s largest manufacturers in order to effectively operationalize sustainability in Chinese manufacturing plants. This is especially evident for large worldwide manufacturers operating subcontractor arrangements in developing nations and “tiger economies”, such as India, Mexico and China (and the rest of Southeast Asia). Global manufacturer efforts underscore how successful greening efforts in supply chains can be based on value creation through the sharing of intelligence and know-how about environmental and emerging regulatory issues and emerging technologies.

Suppliers and customers stand so much to gain from collaboratively strengthening each other’s performance and sharing cost of ownership and social license to operate.  But as I have stated before, supply chain sustainability and corporate governance must first be driven by the originating product designers and manufacturers that rely on deep tiers of suppliers and vendors in far-away places for their products.


Note: This piece is adapted from a recent article that I wrote, “Navigating China’s Green Road” that appears in China Sourcing Magazine